background image

16

Delta Building Trades and Home Shop Machinery

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine
accessory which in normal use has proven to be defective in workmanship or material, provided that the
customer returns the product prepaid to a Delta factory service center or authorized service station with
proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify
the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor
manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for
any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or
specifically authorized by anyone other than an authorized Delta Service facility or representative. Under no
circumstances will Delta be liable for incidental or consequential damages resulting from defective products.
This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to
defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose,
or otherwise, are expressly disclaimed by Delta.

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable/Delta
Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or
to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In 
Canada call 1-800-463-3582).

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable 

• 

Delta Factory Service Centers,

and Delta Authorized Service Stations. Please visit our Web Site 

www.deltamachinery.com

for a catalog or

for the name of your nearest supplier.

WARNING:

Since accessories, other than those offered by Delta, have not been tested   

with this product, use of such accessories could be hazardous. For safest operation, only 
Delta recommended accessories should be used with this product.

Summary of Contents for 17-900

















Reviews: