- -
19
8.
Once both values have been set, a summary will be displayed showing the start and end time of
the LOG session.
LOGGING MENU
SETTED LOG
START Date
2010/02/10 10:29:00
END Date
2010/02/10 10:39:00
<ESC> exit/cancel
<ENTER> confirm
9.
Press
ENTER
to confirm or
ESC
to exit without enabling the automatic start: In both cases, you
will return to the
LOGGING
menu.
10.
Press
MENU
to exit immediately from the main menu.
When the instrument starts automatically a LOG session, a beep is issued on each capture and the
blinking
LOG
message is shown at the top of the display.
Press
MEM
to stop the session before the set time.
To cancel the automatic start setting, use the
Start Log Erase
function as illustrated in the
following paragraph.
NOTE
:
The automatic logging session is started even when the instrument is off
. If it is off
when the automatic logging session is started, the instrument, even if powered by the mains, is
turned on few seconds earlier and remains on at the end of logging. If it is powered by the battery, it
is turned on and off at each data capture, except when the interval is lower than 5 minutes. At the
end of logging, it is turned off for good.
See paragraph 4.2.2 to set the automatic shut off.