background image

GUARANTEE CONDITIONS
All our appliances have been subjected to strict tests and are guaranteed for 24 months from date of pur-
chase. The Company undertakes to repair or replace free of charge any parts which it considers to be inef-
ficient within the guarantee period. Complete replacement of the instrument is excluded and no requests for
damages are recognized, whatever their origin. Repairs are carried out in our own Technical Service
Department. Transport expenses are borne by the buyer. The guarantee does not include: accidental
breakages due to transport, incorrect use or neglect, incorrect connection to voltage different from
that contemplated for the instrument, probes, sensors, electrodes and all accessories. 
Furthermore
the guarantee is not valid if the instrument has been repaired or tampered with by unauthorized third par-
ties, or adjusted for faults or casual checking. The guarantee is valid only if all parts of the guarantee card
have been filled in. Any instruments sent for repairs must be accompanied by their guarantee certificate. For
all disputes the competent court is the Court of Padua.

CE CONFORMITY

Safety

EN61000-4-2, EN61010-1 level 3

Electrostatic 
discharge

EN61000-4-2 level 3

Electric fast
transients

EN61000-4-4 level 3

Voltage variations

EN61000-4-11

Electromagnetic
interference

IEC1000-4-3

sucseptibility

Electromagnetic
interference

EN55020 class B

emission

DELTA OHM SRL
VIA G. MARCONI, 5 - 35030 CASELLE DI SELVAZZANO (PD) - ITALY
TEL. 0039-0498977150 r.a. - FAX 0039-049635596
e-mail: [email protected] - Web Site: www.deltaohm.com

SIT CALIBRATION 

CENTRE N° 124

Summary of Contents for HD 9213-R1































Reviews: