FAULTY OPERATION WHEN SWITCHING ON AFTER
CHANGING THE BATTERY
If the instrument does not switch on or off after changing the battery,
repeat the battery changing procedure, waiting for a few minutes to allow
the circuit condenser capacities to be completely discharged, then insert
the battery.
Check that the battery you are using is really efficient; sometimes unused
batteries have not been recently manufactured so, due to the auto-dischar-
ge phenomenon, their voltage level is insufficient for correct operation of
the instrument.
WARNINGS
- If the instrument is not to be used for a long time the battery must be
removed.
- If the battery is flat it must be replaced immediately.
- Take steps to avoid leakage of liquid from the battery.
- Use good quality leakproof batteries.
MAINTENANCE
Storage conditions
- Temperature: -20...+60°C.
- Humidity: less than 85% relative humidity.
- Do not store the instrument in places where:
1) There is a high degree of humidity
2) The instrument is exposed to direct sunlight
3) The instrument is exposed to a source of high temperature
4) There are strong vibrations
5) There is steam, salt and/or corrosive gas.
The instrument body is made of plastic so it must not be cleaned with
detergents which can spoil plastic.
ENGLISH
– 49 –
