Delta Kitchen KS 100 Instruction Manual Download Page 5

Helpline No:  

0 808 / 1 01 22 42 (UK)     1 800 / 65 50 09 (IR)

Web Support: 

www.monolith-support.com

Model Number: 

KS 100

04

05

 

When sharpening a knife, always hold the appliance steady with your left hand and pull the knife 

through the sharpening grooves with your right hand. 

6.1.  Pull the knife through the left and right coarse sharpening grooves  

on grinding block 1 

1

. The knife only needs to be drawn through  

the right and left slots for coarse grinding once 

1

 (Figure 

B

).

6.2.  Note that you will need to use both sharpening slots with the same  

frequency to achieve a uniform sharpening. Now draw the knife  

alternately through the left and right slots for fine sharpening 

 

on grinding block 2 

2  

. Draw the knife through both slots around  

4–6 times 

2

. Generally, it should be enough to draw the knife through  

twice slowly (approx. 4–6 seconds) and then twice quickly  

(approx. 1–2 seconds) through each slot. Blunter knives may need  

more sharpening (Figure 

C

).

6.3.  To check the level of sharpness, test the knife on appropriate material. 

Before continuing to resharpen, clean the knife thoroughly.

6.4.  If the desired level of sharpness has not been achieved, draw the knife another 2–3 times  

alternately through each of the slots for fine sharpening on grinding block 2 

2

.

6.5.  Before using the sharpened knife in the household, clean it thoroughly to remove  

any residue from the sharpening process, e.g. metal dust or shavings.

Note: 

Always draw the knife the same amount of times through each of the left and right 

slots to ensure an even sharpening.
For a 20 cm blade, each pull through should last approximately 6 seconds.
Shorter knives should be pulled through in 3–4 seconds.
When sharpening, apply slight pressure in the direction of the sharpening discs to ensure 

even contact between the blade and the discs during each movement. Additional pressure 

is not necessary and will not speed up  

the sharpening process. 
Avoid cutting into the plastic housing. Accidental nicks in the housing will not affect the 

operation of the knife sharpener or damage the blade.

Caution:

  after sharpening, the blade is razor sharp! To avoid over- 

heating, do not exceed the maximum operating time of 2 minutes.  

Allow the device to cool down for at least 20 minutes before recommencing.

B

C

1

2

How to use

6

Important:  

When sharpening a knife for the first time 

 

 

           or if your knife is particularly blunt, proceed as described here in 6.1.

Summary of Contents for KS 100













Reviews: