EN
12
11
3/ Wireless association
3.1.2 Several receivers or motors are in association
standby mode
❶
On the remote control press
and
at the
same time and hold for 3 seconds, until the red
LED flashes. Release.
The remote control searches the different receivers
or motors.
The LED flashes red, then briefly green as soon as a
new receiver is found.
❷
When the LED starts flashing red slowly, press
the
button as many times as required to
select the receiver to associate.
The corresponding shutter activates briefly.
❸
Once the receiver has been found, press
.
❹
After a few seconds, the shutter will be activated
twice to confirm the association.
To exit association mode, press
for 3 seconds.
3.2 Associate multiple receivers
or motors
❶
Set the receivers to association standby mode.
❷
On the remote control press
and
at the
same time and hold for 3 seconds, until the LED
flashes. Release.
The remote control searches the different receivers
or motors.
The LED flashes red, then briefly green as soon as a
new receiver is found.
❸
When the LED starts flashing red slowly, press
and
at the same time and hold for 3
seconds until the red LED turns on.
❹
The shutters are activated briefly to confirm the
association.