DELTA DORE TYXIA 253, Manual

Page: 81 / 88

EN
- 81 -
Removing the associations
Removing an association group or a
scenario
On the TYXIA 253, press the Select. button until
the display flashes (approx. 5 sec.).
Then press and release the Select. button to select
the group or scenario to remove. Then press one
of the
, , , or
buttons for 5
seconds.
For each receiver in the group, press and hold
the association button(s) of the receiver (the LED
flashes after 3 seconds).
Keep pressing until the LED extinguishes to confirm
that all the receiver associations are removed.
Important: This operation also removes the
associations of the receiver with other products.
On the TYXIA 253, select another group to remove
or press the Select. button for 5 seconds to exit
the association mode.
Create a scenario
On the TYXIA 253, press and
release the Select. button to
select the scenario association
screen.
Set the receiver(s) to the
required state (blinds lowered,
lights on at 70%, etc.).
Next, set the receivers to
association mode (see their
respective guides).
On the TYXIA 253, press the
or
scenario button.
Check that the receiver LEDs
are no longer flashing.
Exit the association mode
Press the Select. button for 5 seconds.
Select.
Select.
70%
Via an X2D receiver
Starting up
   