- 37 -
Re-associating a PLC receiver
For example, to modify its load shedding channel.
• Set the transmitter to PLC association mode
(zone + load shedding channel).
• Press and hold the
button on the receiver for
5 seconds until the OK LED begins to flash slowly.
• Press and release
button on the receiver.
The OK LED comes on steady. The receiver is
associated.
Associating a PLC receiver for DHW control
To control the hot water tank using a suitable PLC
receiver (e.g. TC 51098).
From the PLC DHW screen.
On the receiver, the OK LED
flashes slowly.
Press and release the
button.
The green LED stops
flashing.
The receiver is associated
with the system.
To exit configuration mode, turn the selector dial to the
right.
Wireless/PLC association (menu R)
Associating receiver A.
Programming zone selected: PLC 1.
Press + or - to select the load shed-
ding channel: d=1.
On the receiver, the OK LED
flashes slowly.
Press and release the
button.
The green LED stops flashing.
Receiver A is associated with PLC•zone 1 and load
shedding channel d1.
Associating receiver B.
Programming zone selected: PLC 1.
Press + or - to select the load shed-
ding channel: d=2
On the receiver, the OK LED
flashes slowly.
Press and release the
button.
The green LED stops flashing.
Receiver B is associated with PLC•zone 1 and load
shedding channel d2.
- 36 -
