Delta Controls
Cautions or Warnings
This controller is an Electro-statically sensitive device. Proper ESD protection (ground strap)
should be used when installing this product so that damage to the product does not occur.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions. Replace the battery with type CR2032.
Equipment damage or loss of data may occur if these procedures are not followed as specified.
Installations requiring CE conformance
: All wiring for CE rated products must use an extra low
voltage (SELV) or protective extra low voltage (PELV) transformer. Use safety-isolating
transformers, (Class II transformer) per EN61558. The transformer must be rated for 100% duty
cycle.
Mounting
The DFM-1616 includes a plastic enclosure that can be quickly mounted with two screws (not provided). This
controller should be mounted in an appropriate location within packaged equipment or another enclosure that
meets code requirements.
Page 2 of 10
