SECTION 2: CRIB ASSEMBLY
STEP 2
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
13
FROM STEP 1
1. INSERT (4) M4x30mm METAL PINS (PART NN) INTO THE HOLE IN EACH OF THE STABILIZER
BAR (PART V).
2. INSERT THE METAL PIN INTO THE HOLES IN THE FRONT POST OF THE FINISHED CHANGING
TABLE. ATTACH WITH (1) M6x75mm BOLT (PART JJ) AND (1) BARREL NUT (PART PP). TIGHTEN
WITH THE M4 ALLEN WRENCH.USE THE FLAT HEAD SCREWDRIVER TO HOLD THE BARREL
NUT IN THE PROPER ALIGNMENT.REPEAT ABOVE WITH THE CRIB END (PART S).
DO NOT
TIGHTEN BOLTS COMPLETELY. THEY WILL BE TIGHTENED IN SECTION 2 STEP 4.
V. STABILIZER BAR x 1
JJ. M6 x75 mm BOLT x 2
PP. BARREL NUT x 2
M4 ALLEN WRENCH
SUPPLIED
NN. Φ4x30 mm METAL PIN x 4
JJ
JJ
V
V
NN
NN
PP
PP
PP
V
JJ
PULL GENTLY
