SECTION 2: CRIB ASSEMBLY
STEP 1
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
12
FROM SECTION 1
STEP 4
JJ
T. CRIB BACK RAIL x 1
W. CRIB LEFT END x 1
JJ. M6 x75 mm BOLT x 4
PP. BARREL NUT x 4
M4 ALLEN WRENCH
SUPPLIED
JJ
PP
PP
T
W
PP
PP
JJ
JJ
ATTACH (1) CRIB BACK RAIL (PART T) AND (1) CRIB LEFT END (PART W) TO THE ASSEMBLIY
FROM SECTION 1 STEP 4 USING (4) M6x75 mm BOLTS (PART JJ) AND (4) BARREL NUTS
(PART PP). TIGHTEN WITH THE M4 ALLEN WRENCH.USE THE FLAT HEAD SCREWDRIVER TO
HOLD THE BARREL NUT IN THE PROPER ALIGNMENT.
DO NOT
FULLY TIGHTEN BOLTS AT
THIS TIME, LEAVE SLIGHTLY LOOSE. THEY WILL BE TIGHTENED IN SECTION 2, STEP 4.
