HARDWARE SYSTEM - REVIEW BEFORE ASSEMBLY
4
C. CRESCENT
WASHER
A. 50mm Bolt
INSERT THE DOWELS IN THE RAIL
INTO THE HOLES IN THE E POST.
INSERT THE BOLT INTO THE SLOT. TURN
CLOCKWISE WITH FINGERS OR THE ALLEN
WRENCH PROVIDED.
DO NOT
FULLY
TIGHTEN, LEAVE 1/2” (12mm) EXPOSED.
SLIDE THE CRESCENT WASHER OVER THE
EXPOSED BOLT, BEHIND THE HEAD OF THE
BOLT. TIGHTEN THE BOLT WITH THE ALLEN
WRENCH PROVIDED.
INSTALL (1) BOLT AND (1) CRESCENT WASHER
AT A TIME. TIGHTEN UNTIL IT LOOKS LIKE THE
PICTURE.
