8
Bassinet Base Assembly - continued
3
Continue to Step 4...
On other side of assembly, attach Rocker
Legs (D) into Locking Rocker Base (C).
Then attach Locking Rocker Base to
Accessory Basket Tubes. Secure using
two (2) Rocker Leg Screws (M). The
screws will go through the Locking
Rocker Base, Rocker Legs and into the
Accessory Basket Tubes (
see Figure 1
).
Note: Snap button holes on Rocker Legs
must face towards the inside.
00078
- Screwdriver
HARDWARE SHOWN
AT ACTUAL SIZE
D
M
00068
- Rocker
Legs
(x2)
D
00077
- Rocker Leg
Screw
(x2)
M
Figure 1
00064
- Locking
Rocker Base
(x1)
C
C
Parts Needed:
BASSINET BASE ASSEMBLY
21
CHANGER ASSEMBLY
17
Continue to Step 18...
Changer Assembly
Parts Needed:
Place the Bassinet against a wall and lock
the two (2) Locking Rocker Base caster
wheels (
see Figure 1
). This will keep the
Bassinet in a stationary position.
Figure 1
