background image

Disassembling Bassinet for Storage

To disassemble Bassinet for storage, follow assembly steps in reverse.  

Store all parts and hardware together in a safe place.  Store the instruction manual for future 
reference.  

Fabric:  
DO NOT USE THIS PRODUCT WITHOUT FABRIC ASSEMBLY IN PLACE
.  Fabric Assembly may be 
removed for washing.  Always follow instructions for disassembly and reassembly.  Fabric assembly 
may be hand-washed in mild detergent.  Never use bleach.  Air dry or use dryer on the lowest 
setting.  Use iron for touch up on fabric for best results.  Please note that the Canopy fabric cannot be 
removed from Canopy frame, and may be hand-washed. 

Frame: 
Frame paint may be touched up as needed.  Use only non-toxic paints approved for children’s 
products.  Check all frame fasteners occasionally.  Tighten all screws and bolts as necessary.    

Cleaning and Maintenance

To install batteries:  First unscrew the battery cover and install 3 C batteries as shown in the 
battery compartment.  

To install batteries:  First unscrew the battery cover and install 3 AAA batteries for Remote 
Controller.  

SAFE BATTERY USE

•  Keep b

atteries out of the reach of children.

 

•  

Do not mix old and new batteries.   

 

•  

Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.  

 

•  

Do not mix different battery types.  

 

•  

Make sure batteries are inserted correctly.  

•  

Discard leaky batteries immediately.  When discarding batteries, be sure to dispose of them in 

   the proper manner, according to your state and local regulations.

Battery Power Pack and Remote Controller

27

2

WARNING -

BASSINET WARNINGS

Read all instructions BEFORE assembly and USE of product.  KEEP INSTRUCTIONS FOR
FUTURE USE.

•  

Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or 

   sharp edges.  NEVER use this product if there are any loose or missing fasteners, loose joints, 
   broken parts, or torn mesh/fabric.  Check before assembly and periodically during use.  Contact 
   Delta Children’s Product Customer Service Department at 212-645-9033 (8:00am ~ 4:30pm 
   EST)
 for replacement parts, repair or instructions.  DO NOT substitute parts.

•  F

ALL HAZARD – To help prevent falls, DO NOT use this product when the infant begins to push   

   up on hands and knees or has reached manufacturer’s recommended maximum weight of 15 lbs. 

•  

Use bassinet with only one child at a time.

•  

Strings can cause strangulation!  DO NOT place items with a string around a child’s neck, such as 

   hood strings or pacifier cords.  DO NOT suspend strings over a crib or attach strings to toys.  

SUFFOCATION HAZARD:  
Infants can suffocate:
 

•  In gaps 

between an extra pad and side of the bassinet/cradle.

 

•  On so

ft bedding.

 

NEVER add a mattress, pillow, comforter or padding.  Use ONLY the pad provided by the 

 

manufacturer.

 
 

    intended for that purpose.  They can cause suffocation.  

 

• 

 To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their  

  

   backs to sleep, unless otherwise advised by your physician.

 

•  

If a sheet is used with the pad, use only the one provided by the manufacturer or one 

 

   specifically designed to fit the dimensions of the bassinet/cradle.  

 

• 

 The total thickness of the mattress should not exceed 1 1/2 in. and the length and width   

 

   should not allow a gap greater then 1 in. between the mattress and the side of the

 

   bassinet when the mattress is pushed up against the sides and into one corner of the unit.  

 

•  

DO NOT leave child unattended in the bassinet with the wheels on the bassinet frame in  

 

   the “up” position.

 

•  

DO NOT place bassinet near a window where cords from blinds or drapes may strangle a  

 

   child.  Child may fall out of window.  DO NOT place cords, straps or similar items that could  

 

   become wound around a child’s neck in or near the bassinet.  

 

•  

CAUTION:  Check proper fit of mattress.  Mattress should not be more than 1 1/2 in. thick.  

 

   The maximum gap between mattress and inside of the bassinet border (or edge) should 

 

   be no more than 1 in.

Failure to follow these warnings and assembly instructions 
could result in serious injury or death. 

!

WARNINGS

Summary of Contents for 35301-310















Reviews: