6
Customer Service [email protected]
www.DeltaChildren.com
FRONT WHEEL
CASTER
FRONT LEG
LATCH CLIP
SIDE FRAME
ASSEMBLY
1
2
3
ATTACHING FRONT SWIVEL WHEELS
• Slide the front wheel caster onto the front leg as shown until you hear a
“click”.
• Pull down on the front wheel assembly to make sure it is securely
attached to the front leg.
• Repeat this procedure to attach the other front wheel assemblies.
ATTACHING REAR NON-SWIVEL WHEELS
• Locate the legs on the rear of the stroller.
• Locate the Rear Non-Swivel Wheels and align with the stroller frame leg.
• Attach Rear Non-Swivel Wheel into the rear of the stroller frame leg.
Make sure the pin is aligned with the housing, until it “CLICKS” into a fully
locked position. Make sure the wheel is in a fully locked position by pulling
outward on the wheel.
• Repeat for all wheels.
ATTACHING LEFT & RIGHT HANDLE BARS
• Locate a LEFT & RIGHT handle bar.
• Align the left handle bar to the left post of stroller frame and assemble
until you hear a “CLICK”.
• Locate a M5 screw and assemble to the top hole above the valco pin
and secure with a screw driver. Make sure the head of the M5 screw is
facing outward of the stroller frame.
• Once completed, repeat steps for the right handle bar.
NOTE: Make sure the valco pin and M5 screw is aligned with the hous-
ing, until it is into a fully locked position. Pull upward on both handle
bars to ensure they are all well fastened.
4
REMOVING LATCH CLIP
• Locate the latch clip on the side frame of the stroller.
• Pull to release latch clip.
*Screw is actual size to scale
M5 (31MM) Screw (X2)
