6
ELECTRICAL CONNECTIONS
COMPLETING THE INSTALLATION
REMEMBER – Power should remain off!
1.
Connect the fan supply (black) wire to the black
household wire. (Fig. 9)
2. Connect the fan neutral (white) wire to the white
household wire. (Fig. 9)
3.
Connect the fan ground wire (green) to the
household ground wire.(Fig. 9)
4.
After connecting the wires, spread them apart so
that the green and white wires are on one side of
the outlet box and the black wires are on the other
side. Turn the connecting nuts upward and push
the wiring into the outlet box.(Fig. 10)
1.
Make sure the wiring is safely inside the outlet box
as instructed in Electrical Connections.
2. To install the ceiling canopy, loosen the 2 screws
from the hanger bracket without fully removing
them. Slide the ceiling canopy up to the hanger
bracket through the large hole side and rotate the
ceiling canopy so the 2 screws move into the small
opening of the key-slot. Secure by tightening the
two set screws. (Fig.11)
3.
Securely attach and tighten the canopy cover over
the screws in the hanger bracket, utilizing the
key-slot twist-lock feature. (Fig.12)
Note: Do not attempt to test the connections or
the fan by turning the power on without installing
the blades and light kit and pairing the remote.
GREEN
Ground Conductor
WHITE
BLACK
GREEN
WHITE
BLACK
Outlet Boxes
120V Supply Circuit
BLACK
GREEN
WHITE
Ceiling canopy
Screws
Canopy cover
12
11
9
10
