6
7
ASSEMBLY INSTRUCTIONS
5. Remove the fan junction box cover. Using wire
nut(not supplied), connect house wires to fan
wires as shown in the wiring diagram on page
4. 14AWG is the smallest conductor that shall
be used for branch circuit wiring. Reattach fan
junction box cover.
6. Install a circular 4 in. duct (not included) and
secure it with duct tape or clamps
(neither included).
Finish ceiling work. The ceiling hole should be
aligned with the edge of the fan housing.
EXISTING CONSTRUCTION
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. Remove existing fan.
2. Measure the opening to ensure it is large enough
to accommodate the new Fan Body
(7 1/2in. x 7 1/4in.).
Note: 7 1/4 inch side of opening should be flush
with the joist.
wire nut
(not included)
Product
wires
House
wires
Ceiling
4 in. Duct
Duct tape
or clamp
5
6
1
2
