background image

A.

B.

Wrap the shower arm 

threads with plumber 

tape before installing into 

plumbing fitting.  Hand 

tighten hose end to shower 

arm (or water supply) 

by turning clockwise.  

Then fully tighten with 

an adjustable wrench or 

pliers.  Use a soft cloth 

between the jaws of the 

tool and hose connector to 

protect the finish.

Carefully tighten 

other end of 

hose to the hand 

shower.  Place 

the hose from 

the hand shower 

into the holder (or 

bracket) section of 

the arm mount and 

slip down.  

Do not 

force.  The hose 

takes a “natural 

drape” after warm 

water has been 

run through it.

The arm mount unit (for the 

hand shower) of the Wall 

Slide Bar can be adjusted 

(7A) by pushing up or down 

on the extended Paddle to 

move the unit up or down (on 

vertical or angled Slide Bar 

installations) and left or right 

(on horizontal installation).  

After positioning as desired, 

flip the Paddle into the 

straight (locked in) position.  

In addition, (7B) the arm 

mount can be adjusted by 

lightly tapping on the base of 

the arm mount unit.

The arm mount unit 

also can be twisted 

clockwise or counter-

clockwise for desired 

positioning for the 

hand shower.

Additional adjustments of the arm mount unit 

is available with the holder section of the 

arm mount unit.  This holder can be turned 

clockwise or counter-clockwise for desired 

mounting of the hand shower.

Do not force the 

handle in or out of 

the arm mount unit.  

The hand shower 

is easily removed 

from the arm mount 

by lifting the handle 

upward.

Note:  This “water saver” shower is designed 

to limit water usage to 2.5 gallons per minute 

maximum.  A flow control disc is pre-installed in 

the end of the handle where the handle attaches 

to the hose.  The hand shower also contains 

dual check valves for back-flow protection.

  Cleaning Instructions

To clean the hand shower face plate:  Remove the shower handle from 

the hose.  Soak the hand shower in a 50/50 solution of white vinegar 

and water for 30 minutes to dissolve mineral buildup.  Reassemble; do 

not overtighten the handle to the hose.  Turn on the shower to wash the 

impurities out of the hand shower.

To clean the Wall Slide Bar or Arm Mount Unit:  Wipe with soft, damp 

cloth - do not use detergent or cleansers that may be harmful to the finish.

5.

7.

9.

10.

8.

6.

All parts and finishes of the Delta

®

 faucet are warranted to the original consumer purchaser to be 

free from defects in material & workmanship for as long as the original consumer purchaser owns 

their home. Delta Faucet Company recommends using a professional plumber for all installation 

& repair.
Delta

  

will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves 

defective in material and/or workmanship under normal installation, use & service. Replacement 

parts may be obtained by calling 1-800-345-DELTA (in the U.S. and Canada) or by writing to:
In the United States: 

In Canada:

Delta

  

Faucet Company  

Masco Canada Limited, Plumbing Group

Product Service 

350 South Edgeware Road,

55  E. 111th Street 

St. Thomas, Ontario, Canada N5P 4L1

Indianapolis, IN 46280 
This warranty is extensive in that it covers replacement of all defective parts and even finish, but 

these are the only two things that are covered. LABOR CHARGES AND/OR DAMAGE INCURRED 

IN INSTALLATION, REPAIR, OR REPLACEMENT AS WELL AS ANY OTHER KIND OF LOSS OR 

DAMAGES ARE EXCLUDED. Proof of purchase (original sales receipt) from the original consumer 

purchaser must be made available to Delta for all warranty claims. THIS IS THE EXCLUSIVE 

WARRANTY BY DELTA FAUCET COMPANY, WHICH DOES NOT MAKE ANY OTHER WARRANTY 

OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY.
This warranty excludes all industrial, commercial & business usage, whose purchasers are 

hereby extended a five year limited warranty from the date of purchase, with all other terms of this 

warranty applying except the duration of the warranty. This warranty is applicable to Delta

®

 faucets 

manufactured after January 1, 1995.
Some states/provinces do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you. Any damage to this faucet as 

a result of misuse, abuse, or neglect, or any use of other than genuine Delta

®

 replacement parts 

WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from 

state/province to state/province. It applies only for Delta

®

 faucets installed in the United States of 

America, Canada, and Mexico.

LIFETIME FAUCET AND FINISH LIMITED WARRANTY

© 2011 Masco Corporation of Indiana

2

72638   Rev. A

72638 Rev A.indd   5

11/15/11   4:33 PM

Reviews: