24
Trigno™
System User’s Guide
Trigno System Settings
The Settings tab allows several system parameters to be modified as needed.
Figure 7: Trigno System Settings panel.
Frequency Set
Use this setting to change the frequencies being used for wireless
communication. The default set is “A”. The frequency set should only be
changed if nearby sources are interfering with Trigno communications or the
particular operating environment is causing significant path loss on the current
frequency set. Note that changing the communication frequency set will
require sensor re-pairing. Frequencies within the sets are defined by the system
and cannot be changed by the User.
Audible Warnings
This option will generate an audible “ping” along with a small message,
whenever a sensor falls out of range or it’s battery is excessively low
.
