10
MAN-039-1-1
LED State Descriptions
1)
Power Off
: No LED arrow activity is present when the sensor is off.
2)
Power On:
When undocked, the sensor illuminates white and fades to
black. A magnetic field will turn the sensor on within 6 seconds, otherwise
the arrow fades to dark and sensor turns off.
3)
Charging
: Sensor Charging in the Trigno Base Station is denoted by
continuous amber LED arrow illumination
4)
Charge Complete
: Once the internal sensor battery has been fully
recharged, the LED arrow illuminates to continuous green.
5)
Identification Mode
: The arrows blink white upon this software command
so that it can be easily identified and located.
6)
Startup Scan
: upon power-up the sensor actively searches for a host to
connect to (PC Base Station or BLE tablet).
7)
Power Up Error
: Sensor fails self-check on power up
8)
Scan (Base):
Sensor was previously paired and is scanning for the active
base station.
9)
Low Power Scan (Base):
Sensor was previously paired and has been
scanning for the active base station for more than 5 minutes.
10)
Data Collection (Base):
Data from sensor are streaming to a paired PC-
connected base station.
11)
Configuration Change (Base)
: Sensor acknowledges change in
configuration sensor from host base station.
12)
Pairing (Base)
: Sensor is performing a pair operation with the base host.
13)
Pairing Success (Base)
: Sensor successfully completes a pair operation with
the Base Station host.
14)
Pairing Fail (Base)
: The pair operation did not complete successfully with
the Base Station host.
15)
Advertise (BLE):
Sensor is broadcasting to connect with a BLE host.
16)
Low Power Advertise (BLE)
: Sensor is broadcasting to connect with a BLE
host for more than 5 minutes.
17)
Data Collection (BLE)
: Sensor is sampling and streaming data to BLE host.
18)
Idle (BLE):
Sensor is waiting for a Bluetooth BLE command.
