Power
USB
Analog Output Connectors *
Trigger
Electrical
Outlet
Computer
*available on select Trigno base station models
1
Connect Trigno
®
System
Connect the Trigno base station to an electrical outlet, and to your computer via USB.
!
Optional: Connect third-party devices.
Digital, analog, and triggering capabilities are all available.
Contact
for more info.
3
Experiment Set-up
Follow steps
A
to
D
to achieve high quality surface EMG signals.
4
Record and Analyze Data
2
Set up EMGworks
®
Software
Download a copy of EMGworks at
www.delsys.com/emgworks/download
. Run the installer and follow on-screen instructions to
install. Open EMGworks Acquisition and select
Click to Activate
, then enter your 32-digit license key and complete activation.
!
One Galileo Sensor will occupy 4 sensor slots
Refer to User Guide for pairing instructions
Diligent skin prep is required for successful collection
with Galileo Sensors
A
B
Build your acquisition protocol and record data in
EMGworks Acquisition
.
Decompose EMG and analyze motor units in
NeuroMap Software Suite
.
Research
A
Open protocol in
your EMGworks
software.
B
Remove Galileo
sensor(s) from
base station and
touch sensor(s)
to .
D
Clean a shaved
muscle site with
an alcohol wipe.
C
Click
, and
pair your
Galileo
sensor(s).
E
Using the
Adhesives, place
the circular head
over the muscle
and the
reference
elsewhere.
