Delphin ProfiMessage, Hardware Manual

Page: 19 / 322

Profi Message
Note: Compression can cause the min/max characteristic values to not
exactly match the time signal or spectrum.
11. Click OK to create the connection.
12. While you have a connection, set your device address to an IP address that is
suitable for your network, as described above. However do not forget to reset
your PC to the original address.
Offline configuration
If you want to work with a saved Configuration offline, select Connect
→
Add Del-
phin device and your device type.
Enable Offline configuration and enter the path and filename, or click on Select , to
search for the file.
The configuration file is loaded and the device contained in it is shown in the chan-
nel tree as a physically available device.
All changes you make to the configuration are saved dir-
ectly in the configuration file.
To connect via XML, you must enable port 1035 for TCP (XiMP), and
to connect via Web socket you must enable port 1036 for TCP
(WiMP).
Refer also to
Main settings: services .
2.3 Starting the device
Just a few steps are required to start using the device:
l
Unpack the device.
l
Schließen Sie an die dreipolige Anschlussklemme eine geeignete Span-
nungsversorgung an und stecken Sie diesen in Buchse „Power“ am Gerät..
Siehe auch Profi Message - Anzeigen und Anschlüsse
The plug is non-interchangeable and polarity-protected and can be inserted
into the socket in only one direction.
The next steps are:
l
Installing programs
l
PC connection
l
Basic settings
2.4 Starting the
Profi Message
device
Just a few steps are required to start using the Profi Message device:
19
Delphin Technology AG
Dezember 2015
Profi Message Manual