Delphin ProfiMessage, Hardware Manual

Page: 14 / 322

Profi Message
Note for administrators
For the connection between PC and the device, you must enable at
least ports 80 and 1033.
2.2 PC connection
For the connection between PC and the device, you must enable ports 80 and
1033. If you use Windows firewall, you may see a warning message when you add
the connection, and a user with administrator rights will need to authorise the con-
nection.
See also
XML network configuration template , LAN connection
Preparing the device to PC connection
l
Connect your PC and the device using the Ethernet crossover cable supplied.
Alternatively you can connect the device and PC also via a network hub or
switch.
Establish device connection
1. Start the DataService Configurator program, to create the connection and
make the configuration.
The DataService starts and the Connections tab is displayed on the left-hand
side in the DataService Configurator.
2. Select menu itemConnect
→
Find Delphin device on LAN. Also, as shown in
the image, you can use the Add driver (connection) context menu in the
DataService entry on the left of the window.
3. The device search takes place and a dialogue with the found device(s) is dis-
played.
14
Delphin Technology AG
Dezember 2015
Profi Message Manual