Delphin ProfiMessage, Hardware Manual

Page: 13 / 322

Profi Message
2 Getting started
This section outlines:
l
How to establish a connection between a PC and the device.
l
The settings required to acquire measurement signals from the device.
For detailed information see these Sections:
l
The Section Profi Message displays and connections gives you an overview
of all the interfaces/connections/ports and LEDs.
l
The Section Configuration and operation explains the different options for set-
ting up the device for measurement tasks. The Section describes specific set-
tings for
Profi Message devices. The available settings for all devices are
available under Common device settings .
See also Configuration and operation .
l
The Section on Examples of connections shows you the options for con-
necting standard sensors and actuators and how to configure them.
l
The Section on Measurement technology notes contains general information
and recommendations on applying measurement technology.
l
Technical data is available in the Section on Technical specifications .
2.1 Installing programs
You need administrator rights to install the pro-
gram.
Install the ProfiSignal CD. During the installation, ensure that you install the
DataService Configurator as a program (and not as a service).
After default installation you will find both of these symbols on your desktop:
The program works DataService Configurator from Delphin as a link between the
PC and the measuring hardware. All devices are immediately configured in DataSer-
vice Configurator.
The ProfiSignal program evaluates and displays measurement data.
13
Delphin Technology AG
Dezember 2015
Profi Message Manual