background image

Other Things You Should Know

8

3. Do not immerse in water.
    •  This product is not meant to be immersed in water or come in 

continuous contact with water.

    •  Before opening or shutting the receiver cradle or battery compartment 

panel, be sure to wipe off water, dust, or sand on the outside of the unit.

    •  If the Delphi Premium Sound System is splashed with salt water, wipe 

clean with a damp cloth, and then dry with a soft dry cloth. Do not wash 
under running water; do not use soap or detergent; do not dry with an 
electric hair dryer.

    •  The supplied AC power adaptor is not water resistant. To prevent shock 

hazard, avoid using the Delphi Premium Sound System near water 
during AC operation.

    •  Water in the headphone jack, or Aux input jack, may cause rusting and 

possible malfunction.

Troubleshooting

If the power is not on: 
•  Connect the AC power adaptor to a wall outlet securely and make sure the 

wall outlet has 110V AC output.

• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they are weak.
•  Make sure battery switch is turned to ‘ON” position if attempting to 

operate on batteries.

Summary of Contents for SA10221









































Reviews: