Multec 3.5 Fuel Injector Application Manual
Appendix
Delphi Energy and Chassis Systems
Revision: 11/05-1 10-1
10.0 Appendix
10.1
Introduction
.
This section contains three checklists intended to verify that all aspects
have been considered for the proper application of the Multec 3.5 injector.
The first checklist (section 10.2) covers the system related topics that need
to be considered when specifying a fuel injector for a particular engine
application. A column is included in the checklist to enter the pertinent
section from the customer requirements document (if applicable) as a
cross-reference. Values for each item should be provided when known.
Delphi can provide technical assistance to determine appropriate values to
use in cases where data is not available.
The second checklist (section 10.3) is focused on specific injector
component details. These details are best considered and documented
during the initial stages of the program. Items requiring additional testing
or consideration can then be identified and included in the program test
plan.
The third checklist (section 10.4) deals with all aspects of product
handling at the customer manufacturing facilities. This checklist should
be used as early in the program as possible to verify that acceptable
product handling and in-plant diagnostic procedures are employed. Any
modifications to the customer manufacturing process highlighted by this
checklist are easiest to implement early in manufacturing process
development.