DèLonghi PrimaDonna Avant ESAM 6700 EX2, Instructions For Use Manual

Page: 13 / 26

11
that the hot water spout is inserted on the
nozzle and place a container with a minimum
capacity of 100 ml underneath (fig. 4).
Press the
OK icon (fig. 2).
“Please wait.” is displayed and the appliance
begins to deliver water from the hot water
spout. This is priming the water system. (It
is normal for the machine to make some
noise).
The appliance ends the first start up procedure,
then the message “Turning off, Please wait” is
displayed and the appliance goes off.
The coffee maker is now ready for normal use.
Please note:
UÊ 7 i˜ÊÕȘ}ÊÌ iÊ>««ˆ>˜ViÊvœÀÊÌ iÊwÀÃÌÊ̈“i]Ê
you need to make 4/5 cups of coffee or 4/5
cappuccinos before the appliance starts to
give satisfactory results.
TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the
main switch on the back of the appliance is in the
I position (fig. 1).
After setting up the appliance, each time the
appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be
interrupted.
The appliance is ready for use only after
completion of this cycle.
Danger of burns!
During rinsing, a little hot water is delivered from
the coffee spouts and collected in the drip tray
underneath.
Avoid contact with splashes of water.
UÊ To turn the appliance on, press the
button (fig. 5). The message “Heating up,
Please wait...” is displayed.
After heating, the message “Rinsing...” is
displayed. As well as heating the boiler, the
appliance also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the
message “STANDARD COFFEE” “Standard taste”
is displayed.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be
interrupted.
Important!
To avoid damaging the appliance, always press
the
button (fig. 5) to turn off.
Danger of burns!
During rinsing, a little hot water is delivered from
the coffee spouts.
Avoid contact with splashes of water.
UÊ /œÊ ÌÕÀ˜Ê Ì iÊ >««ˆ>˜ViÊ œvv]Ê «ÀiÃÃÊ Ì i
button (fig. 5). The appliance performs the
rinse cycle then goes off.
Please note:
If the appliance is not used for an extended
period, place the main switch in the
0 position
(fig. 6).
Never place the main switch in the
0 position
while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing
the P button, the following menu items are available:
Descale, Set language, Energy Saving, Adjust time,
Auto-start, Auto-off, Coffee temperature, Water
hardness, Beep, Statistics, Default values.
Descaling
For instructions on descaling, see page 21.
Setting the language
To modify the language on the display, proceed
as follows:
1. Press the
P icon to enter the programming
menu;
2. Press the or : icon until “Set language”
is displayed;
3. Press the OK icon;
4. Press the or icon until the required
language is displayed;
5. Press the OK icon to confirm;
6. Press the ESC icon to exit the menu.
Energy Saving
Use this function to enable or disable energy
saving mode. When enabled, the function