11
3.
FILL WATER TANK!”: remove the water
tank, fill to the MAX line with fresh
water then replace in the appliance
(fig. 3).
4.
INSERT WATER SPOUT”: Check that the
hot water spout is fully inserted on the
nozzle and place a container with a
minimum capacity of 100 ml under-
neath (fig. 4).
5.
“Water delivery PRESS OK”: press the OK icon on the
display.
6. The appliance starts delivering water from the hot water
spout.
7. The appliance ends the first start up procedure and goes off
automatically.
The coffee machine is now ready for normal use.
Please note:
• When using the appliance for the first time, you need to
make 4-5 cups of coffee or 4-5 cappuccinos before it starts
to give satisfactory results.
TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the main switch on
the back of the appliance is in the
I
position (fig. 1).
Each time the coffee machine is turned on, it performs an auto-
matic preheat cycle and, if necessary, a rinse cycle which cannot
be interrupted. The appliance is ready for use only after comple-
tion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
• To turn the appliance on, press and hold the
button
for a few seconds (fig. 5):
The message “Heating up, please wait” is
displayed.
When heating is complete, the message changes
to “RINSING”.
The appliance is ready for use when an espresso
coffee cup appears on the display.
TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts.
Avoid contact with splashes of water.
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
• first turn the appliance off by pressing the
button
(fig. 5);
• place the main switch in the 0 position (fig. 6).
Important!
Never place the main switch in the 0 position while the appli-
ance is on.
MENU SETTINGS
To access the settings menu, press the MENU icon. Scroll through
the menu by pressing the
or
icon.
To exit the menu, press the
ESC
icon.
The following can be selected from the menu: Rinsing, Select
background, Descale, Install water filter, Set time, Auto-start,
Auto-off, Energy Saving, Set temperature, Water hardness,
Beep, Default values, Statistics, Set language.
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coffee delivered hotter.
Press the
OK
icon to select the function. Press
OK
again to confirm and start rinsing.
After rinsing, the appliance is automatically ready to make the
next drink.
Please note!
During rinsing, a little hot water comes out of the coffee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
Select background
Use this function to change the color of the display background.
Press the
OK
icon to select the function. Press the
or
icon to select the required background,
then press
OK
again to confirm the choice.
Please note!
This menu item can be customised in all profiles (see
“Memorising your personal profile” on page 18).
