16
7. The appliance is now ready for rinsing through with
clean water. remove the water tank, empty, rinse under
running water, fill with clean water and replace. “rinSing
PreSS oK” is displayed.
8. empty the container used to collect the descaler solution
and replace it under the cappuccino maker.
9. Press the
OK
button to start rinsing. hot water flows out
of the spout and the message “rinSing” is displayed.
10. When the water tank is completely empty, the message
“rinSing CoMPleTe PreSS oK” is displayed.
11. Press the
OK
button. The appliance goes off.
To use it again, turn the appliance on by pressing the
button.
SETTING WATER HARDNESS
The deSCale message is displayed after a period of time
established according to water hardness.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the actual
hardness of the mains water in the various regions, varying the
frequency with which the message is displayed.
Measuring water hardness
1. remove the “ToTal hardneSS TeST” indicator paper from
its pack.
2. immerse the paper completely in a glass of water for one
second.
3. remove the paper from the water and shake lightly. after
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. each square corresponds to
one level.
level 1
lmmm
level 2
llmm
level 3
lllm
level 4
llll
Set water hardness
1. access the menu and press the neXT button until “WaTer
hardneSS
llll
” is displayed;
2. Press the
CHANGE
button to select the level of hardness
measured on the indicator paper (see previous section).
When you have finished, the new selection flashes on the
display.
3. Press the
OK
button to confirm the setting.
4. Press the
MENU
button to exit the menu. The light on the
button goes off.
The machine is now reprogrammed with the new water
hardness setting.
SET lANGUAGE
To change the language, with the machine on, press the
Change button for at least 5 seconds until the appliance
displays the installation message in various languages.
Choose the required language as described in the section
“using the appliance for the first time”.
TECHNICAl SPECIFICATION
voltage:
220-240 v~ 50/60 hz max. 10a
absorbed power:
1350W
Pressure:
15 bar
Water tank capacity:
1,8 l
Size: lxhxd:
280x375x360mm
Cable length:
1,5 m
Weight:
10,5 Kg
Beans container capacity:
200 g
The appliance complies with the following eC directives:
• Stand-by Directive no. 1275/2008;
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments
• Materials and accessories coming into contact with food
conform to eeC regulation no. 1935/2004.
DISPOSAl
recommendations for the correct disposal of the
product in compliance with the 2002/96/Ce europe-
an directive.
The product must not be disposed of as urban waste
at the end of its working life.
it must be taken to appropriate local authority separate waste
collection centres or to dealers providing this service.
disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriv-
ing from unsuitable disposal and allows to recover the materi-
als of which it is made in order to make significant savings in
energy and resources.
The product has the crossed-out wheeled bin mark as a
reminder of the obligation to dispose of household appliances
separately.
