8
Cleaning and Maintenance
Removal of the inner glass
door panel
The inner glass door panel can easily be
removed for cleaning by unscrewing the
two screws. Figure 4.
During re-assembly, ensure that the inner
glass is correctly aligned and do not
over tighten the screws.
Cleaning
General
After use allow the oven to cool and whilst the oven is still “warm” it should be wiped
with a damp cloth using warm soapy water. With regular cleaning the oven will remain
in good condition.
It is advisable to disconnect the electrical supply to the oven before cleaning is
undertaken.
Enamel Parts
In order to maintain the condition of the enamel parts, clean and wipe frequently with
hot soapy water. Any obstinate marks can be removed using a paste or cream cleaner
or a well moistened soap impregnated steel wool pad. Rub gently so as not to damage
the surface.
Never use abrasive powders.
Never permit vinegar, coffee, milk, salt water or tomato juice to remain in contact with
the enamel parts as they may stain or discolour the surface.
If any cleaners such as a spray or a stick are used on enamel they must have the VEDC
(Vitreous Enamel Development Council) seal of approval and the manufacturers
instructions must be followed.
figure 4
