15
4. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. Then the machine automat-
ically makes the coffee after delivering the milk.
9.4 Preparing “MILK MENU” drinks
Besides the drinks described above, the appliance automatically
prepares MILK (hot milk), FLAT WHITE, ESPRESSO MACCHIATO
and MY MILK (customisable).
To prepare one of these drinks, simply proceed as follows:
1. Fill the milk container (D) and attach it as described above
(fig. 24).
2. Turn the froth adjustment dial (D1) on the milk container
lid (D2) to the position corresponding to the required froth.
3. Press the
MILK MENU
button (B6).
4. Press < (B4) or > (B8) (fig. 9) until the drink to be pro-
grammed appears on the display (B13) (MILK, FLAT WHITE,
ESPRESSO MACCHIATO or MY MILK).
5. Press the
OK
button (B12- fig. 10) to start delivery.
6. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.
Please note: general indications when preparing all
milk-based drinks
• If you want to interrupt preparation during delivery, press
the corresponding button.
• At the end of delivery, to increase the quantity of milk or
coffee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
9.5 Cleaning the milk container after every use
Important! Danger of burns
When cleaning the internal tubes of the milk container (D4),
a little hot water and steam leak out of the frothed milk spout
(D5). Avoid contact with splashes of water.
“SET DIAL TO CLEAN” flashes on the display (B13) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout
(D5).
3. Turn the froth adjustment dial (D1) to “CLEAN” (fig. 26). A
progress bar appears and gradually fills as the operation
proceeds together with “Cleaning underway”. Cleaning
stops automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container (D) and always clean the hot
water/steam connection nozzle (A8) with a sponge (fig.
27).
Please note!
• To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
9.6 Programming the quantity of coffee
and milk in the cup for the CAPPUCCINO,
CAFFELATTE and LATTE MACCHIATO buttons
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts (A7) and milk spout
(D5).
2. Press and hold one of the buttons until the name of the
drink and “PROGRAM MILK” are displayed.
3. Release the button. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button again.
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coffee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed.
6. Once the required quantity of coffee has been delivered
into the cup, press the button again. Coffee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
9.7 Programming the quantity of coffee and
milk in the cup for MILK MENU drinks
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Press the
MILK MENU
button (B6).
2. Press < (B4) or > (B8) (fig. 9) until the drink to be pro-
grammed appears on the display (B13) (MILK, FLAT WHITE,
ESPRESSO MACCHIATO or MY MILK).
3. Press and hold the
OK
button (B12- fig. 10) until the name
of the drink and “PROGRAM MILK” appear.
4. Release the button. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the
OK
button.
6. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coffee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed.
