DèLonghi DTC 90 G, User Operating Instructions Manual

Page: 45 / 48

45
Fig. 11.2
D
B
PE
A
N
L
230 V
PE N L
1
(L
2
)
Fig. 11.3
Earth cable must be 2 cm longer than neutral and live cables.
Feeder cable section
type H05RR-F
230 V 3 x 0,75 mm
2
ELECTRICAL FEEDER CABLE CONNECTION
The operations must be executed by a qualified technician.
To connect the supply cable:
- Remove the screws securing the cover “ A ” on the rear of the cooker (fig. 11.2).
- Feed the supply cable through the cable clamp “ D ”. The supply cable must be of
a suitable size for the current requirements of the appliance; see the section “Feeder
cable section”.
- Connect the wires to the terminal block “ B ” as shown in the diagram in figure
11.3; or connect the phase wires to the terminal block “ B ” and the earth wire to
the terminal PE as shown in figure 11.2.
- Take up any slack in the cable and secure with the cable clamp “ D ”.
- Replace the cover “ A ”.
Before effecting any intervention on the electrical parts of the appliance, the
connection to the network must be interrupted.