background image

items requiring the lowest temperatures.

•  Silk may be dry-pressed on the reverse.
•  Wool, cotton and fine linen can either be steam-

ironed on the reverse or on the right side, inter-
posing a thin cloth between the iron and the
fabric to avoid “shine”.
Starched fabrics require greater moisture. 
Iron whites and light colours on the right side
and dark colours on the reverse. Embroidery
should also be ironed on the reverse to make it
stand out.

•  Each time the iron is used (including for the first

time) or if you have not used steam for several
minutes, press the steam delivery button a num-
ber of times away from the ironing board. 
This will eliminate cold water from the steam cir-
cuit.

•  During use, the iron can be rested in a "vertical"

position (see figure below). 

However, make sure the surface is even to avoid
the iron falling over.

•  In models with domestic iron, the iron can be

secured in position (see figure on page 15).

Important: never move the appliance by the
iron handle

PREPARATIONS FOR USE

The machine works with normal tap water.

Never

use other types of water, chemical substances or
detergents (e.g. perfumed water, essences, water
softener, etc). 
There is a water hardness indicator paper in the
packaging. Immerse the indicator paper in the water
for one second, shake it to remove excess water, wait
about one minute, then use the result to set the
appliance the first time you use it (see table).

TURNING THE APPLIANCE ON FOR THE FIRST
TIME

• Plug the appliance into a mains socket (fig. 1)
• The display (

F

) shows: 

(see fig. 3).

• Turn the function selector knob (

H

) until the

required language is displayed, then confirm by
pressing the knob (fig. 3).

• The display shows:

(see fig. 4): select the water hardness (soft,
medium, hard, very hard, see table) by turning
the knob (

H

), then confirm by pressing the knob

(fig. 5).

• The display shows:

insert the filter and confirm by pressing the knob
(fig. 6).

• For two seconds, the display shows:

It then shows:

fill the removable water tank (

M

), open the door

(

L

) (fig. 7) and position the tank correctly (fig.

8). Confirm by pressing the knob (

H

).

• The display shows: 

the pump can be heard filling the system with
water.  

14

> 37 

°

F

19 - 36 

°

F

10 - 18 

°

F

0 - 9 

°

ffr

raannççaaiiss  

SSEETT  W

WAATTEER

R  HHAAR

RDDNNEESSSS

IINNSSEER

RTT  SSCCAALLEE  FFIILLTTEER

R

ookk

W

WAAIITT  FFOOR

R  FFIIR

RSSTT  CCYYCCLLEE  

FFIILLLL  TTAANNKK

Soft 

Medium

Hard 

Very hard

Summary of Contents for VVX 2200









Reviews: