18
10
• Open the window or French door slightly and set the outlet
B9
in place as shown in figure 7.
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
AIR CONDITIONING WITH INSTALLATION
If desired, your appliance can also be installed semi-permanent-
ly (Fig.8), following the distances shown in the figure.
min. 30 cm
min. 30 cm
In this case, the following steps are necessary:
• Drill a hole (134 mm diam.) in an outside wall or through
the glass in a window. Follow the height (see fig. 11) and
sizes of the hole indicated in figure 9.
134
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
• Attach the flange accessory
B1
provided to the hole.
• Fit the adapter
B3
in the air exhaust hose housing
A7
on
the back of the appliance (see fig. 1).
• Screw the wall mounting accessory
B4
on the air exhaust
hose
B2
. If necessary, remove the other adapter
B3
from
the air exhaust hose
B2
by unscrewing it (fig. 10).
• Screw the hose on the machine.
1
2
• Fit the end of the hose
B2
to the flange
B1
as shown in fig.
11.
Whenever the hose
B2
is not attached, the hole can be closed
using the cap for the flange
B1
.
8
9
7
in the window
glass
in the wood
base of the
French door
in the wall: we
r e c o m m e n d
insulating the
section of the wall
with a suitable
insulation material
