31
ENGLISH
O p e r a t i o n
ROOM TEMPERATURE BUTTON (MODEL FX400ECO)
When pressing this button (
R
), the room temperature is shown on the display for a few seconds. It
then reverts to showing the current mode. The room temperature cannot be displayed while in
Stand-by mode.
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS…
….WHAT SHOULD YOU DO?
H
H P
HIGH PRESSURE
Insert and re-insert the plug. If the problem persists, call the service
centre.
LOW TEMPERATURE
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
F
F F
FAN FAILURE
P F
PROBE FAILURE
If either of these messages appears, call the service centre.
FULL TANK
FX160ECO
Empty the tank at the rear of the appliance and reposition correc-
tly.
FX400ECO
Empty the internal tank (not visible) through the small drain tube
(11); replace the rubber stopper.
FX160/400ECO GB 24-06-2004 11:55 Pagina 31
