35
P
ROGRAMMIN THE TIMER
The appliance can be programmed to start up and shut down
when required.
Programming start up
•
Press the
ON
button.
The start-up time and message "
ON TIMER
" flash on the remo-
te control display (fig. 31).
•
Press the or buttons to set the time you want the applian-
ce to start up.
•
When that time is reached, press the
SET
button to confirm
(fig. 32). The message "
ON TIMER
" appears on the remote con-
trol display and the symbol is displayed on the appliance
to indicate that the timer is active.
Programming shutdown
•
Press the
OFF
button. The shutdown time and message
"
OFF TIMER
" flash on the remote control display (fig. 33).
•
Press the or buttons to set the time you want the applian-
ce to shut down.
•
When that time is reached, press the
SET
button to confirm
(fig. 34). The message "
OFF TIMER
" appears on the remote
control display and the symbol is displayed on the applian-
ce to indicate that the timer is active.
SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
I
F
…
IS DISPLAYED
,
WHAT SHOULD I DO
?
L
OW
T
EMPERATURE
(frost prevention)
P
ROBE
F
AILURE
(sensor damaged)
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice. The appliance starts
up again automatically
when the defrosting pro-
cess is completed.
If this is displayed, contact
your local authorised servi-
ce centre.
I
F
…
IS DISPLAYED
,
WHAT SHOULD I DO
?
H
IGH
L
EVEL
(tank full)
C
LEAN
Empty the internal safety
tank, following the instruc-
tions in the "End of season
operations" paragraph.
If this reoccurs, contact
your local authorised servi-
ce centre. In heating
mode, attach the conden-
sate drain hose.
This message appears after
about 500 hours of opera-
tion in water mode and indi-
cates that the appliance
requires descaling as descri-
bed in the "descaling" para-
graph.
After descaling or if the alarm reappears too soon after
the last descaling (carried out before the message is dis-
played), reset the alarm by holding the button down
for 10 seconds.
31
32
33
34
F
AILURE
1
(pump failure)
This message could appear in
heating mode if the condensate
drain hose is not attached or is
blocked.
Attach the hose or remove the
obstruction.
