PROBLEM
CAUSE
REMEDY
The air-conditioner
does not work
•
power failure
•
plug is disconnected
•
the notches on TIMER dial have not been set
•
The ON /OFF button (A) is in the OFF position
•
wait
•
connect plug
•
push teeth outwards
•
Press the ON/OFF button
Ventilation only
functions
•
thermostat has activated
•
to make room cooler rotate thermo-
stat counter-clockwise
The mains switch
switches OFF
•
switch off the appliance and call
Service Centre
The appliance does
not cool the environ-
ment sufficiently
•
window open
•
source of heat in room (heater, lamp etc.)
•
room is overcrowded with people
•
air exhaust hose has become disconnected
•
thermostat regulated too high
•
air filter blocked
•
close window
•
re-insert exhaust hose
•
Regulate the thermostat.
•
clean filter
SERVICING
In case of malfunction turn off and disconnect the air-conditioner from power outlet and contact the nearest
Service Centre for qualified assistance.
The appliance does
not heat the environ-
ment sufficiently
(mod. CT250H only)
•
The safety thermostat on the heating element
has been activated.
•
to reset the unit, disconnect it from
mains for a few minutes, eliminate the
cause of overheating and then
reconnect.
TROUBLESHOOTING
