16
pROBLEM
CAUSE
SOLUTION
The air conditioner
does not come on
•
no electricity
•
it is not plugged into the outlet
•
the internal safety device has tripped
•
the safety device of the plug has tripped.
•
restore electricity
•
plug into the outlet
•
wait 30 minutes, if the problem persists
contact your service center
•
reset the safety plug
The air conditioner
works for a short time
only
•
there are bends or kinks in the air
exhaust hose
•
something is preventing the air from
being discharged
•
position the air hose correctly, keeping
it as short and free of curves as possible
to avoid bottlenecks
•
check and remove any obstacles
obstructing air discharge
The air conditioner
works, but does not
cool the room
•
windows, doors and/or curtains open
•
there are heat sources in the room
(oven, hairdryer, etc)
•
the air exhaust hose is detached from
the appliance
•
silver ion and 3M® filter clogged
• the technical specification of the
appliance is not adequate for the room
in which it is located.
•
close doors, windows and curtains,
bearing in mind the “TIpS for
CorreCT USe” given above
•
eliminate the heat sources
•
fit the air exhaust hose in the housing at
the back of the appliance (fig. 1)
•
clean the filters as described above
During operation,
there is an unpleasant
smell in the room
• silver ion and 3M® filter clogged.
•
clean the filters as described above
The air conditioner
does not operate for
about three minutes
after restarting it
•
the internal compressor safety device
prevents the appliance from being
restarted until three minutes have
elapsed since it was last turned off.
•
wait. This delay is part of normal
operation.
The following
message
appears on the
display:
LT / Ft/PF / FI
•
The appliance has a self diagnosis
system to identify a number of
malfunctions.
•
See the Self-DIAGnoSIS chapter.
TROUBLESHOOTING
