23
ENGLISH
Always lock the 2 outer wheels using the
castor locks supplied.
The manufacturer is not liable for any dama-
ge to people or things caused by the positio-
ning of the unit in a manner not compliant
with the basic standards of safety.
Pre p a r i n g f o r u s e
HOW TO CONNECT THE SHEATH
To connect the sheath, follow the above pro-
cedure in reverse. When connecting the
water drain hose, make sure it is pushed in as
far as it will go.
POSITIONING THE OUTDOOR UNIT
The outdoor unit can be placed on a terrace
or balcony (Fig. 12).
The outdoor unit can also be installed on a
window sill, if this faces onto a balcony (Fig.
13)
fig. 12
fig. 13
fig. 14
The outdoor unit may be installed above or at
the same level as the indoor unit, provided
that the difference in level is not greater than
1.5m. The air intake and outlet of the outdoor
unit must be kept clear of obstacles. Leave at
least 6cm between the wall and the rear of
the appliance.
The condensate forming during operation in
air-conditioning mode (in summer) is almost
totally eliminated via evaporation from the
outdoor unit.
In particular cases, if there is excessive humi-
dity, the condensate is drained through a
hole in the base.
To drain the water that forms, use the con-
densate drain connector
supplied, which
must be fitted on the base of the outdoor unit
(see Figure 14). This can then be connected
to a rubber hose
Note: If appropriate, the external unit can be
protected with the protective cover
fixing
it with the screw provided. The outdoor unit
should be protected from the sun, rain, snow
and drips from the roof.
22
19
