GB
Before cleaning or maintenance, turn the
appliance off by pressing the ON/STAND-
BY button (A) or in models with remote
control unit, by pressing the ON/OFF but-
ton, then always unplug the appliance
from the electrical socket.
CLEANING THE SURFACE OF THE
UNIT
You should clean the appliance with a
slightly damp cloth then dry with a dry
cloth.
For safety reasons, never wash the air
conditioner with water. tioner with water.
Precautions
Never use petrol, alcohol or solvents to
clean the appliance. Never spray insec-
ticide liquids or similar products.
CLEANING THE AIR FILTERS
To keep your air conditioner working effi-
ciently, you should clean the dust filter
every week of operation.
The filter is housed in the intake grille.
To clean the filters, proceed as follows:
1. Remove the dust filter by extracting it
upwards (figure
G
).
2. Use a vacuum cleaner to remove dust
accumulations from the filter. If it is
very dirty, immerse in warm water and
rinse a number of times. The water
should never be hotter than 40°C.
After washing, leave the filter to dry,
then put back in place.
START OF SEASON CHECKS
Make sure the power cable and plug are
undamaged and the outlet is in good
condition. Follow the installation instruc-
tions precisely.
END OF SEASON OPERATIONS
• To empty the internal circuit com-
pletely of water, remove the cap
(figure
H
).
• Run off all water left into a basin.
When all the water has been drained,
put the cap back in place.
• Clean the filter and dry thoroughly
before putting back.
Cleaning
H
15
G
