6
• If you have a casement window (figure 4) follow steps 2 &
3 and place the window outlet
B7
outside the window to
exhaust the hot air.
For help with installation, operation, and for all
accessories and spare/replacement parts, please contact
our toll free customer service call center at:
1-800-322-3848
[US only]
1-888-335-6644
[Canada only]
01-800-711-8805
(Mexico only]
or log onto our website at
www.delonghi.com
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be installed semi-perma-
nently (Fig. 5).
min. 12 inches
min. 30cm
min. 12 inches
min. 30cm
Proceed as follows:
• Drill a hole ø 5,25 inches (134 mm) in an outside wall or
through a window pane. Respect the dimensions and
height of the hole given in figure 6 and 7.
134
Ø 5.25 inche
s
• Fit the wall flange
B1
into the hole.
• Fit the air exhaust hose
B2
in the relevant housing located
on the rear side of the appliance. (fig. 1).
• Fit the end of the hose
B2
to the wall flange
B1
as shown in
fig. 7.
• When the hose
B2
is not connected, the drilled hole can be
closed with the flange cap
B1
.
3
4
5
6
in the
window
panel
in the wooden
kickboard
of a French
window
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.
