11
ENGLISH
Description of Pinguino
DESCRIPTION OF PINGUINO PAC 360 CONTROLS
ON/OFF pilot light
ON/OFF button
Thermostat
Fan speed select
button
Timer
ON/OFF
button
“Alarm” pilot light
Timer ON/OFF
pilot light
Timer
A
B
C
SETTING THE TIMER
The programmer/timer, like all clocks, must be
set to the exact time. If for example it is 4.00
p.m., turn the dial in a clockwise direction
(following the direction of the arrow) until the
number 4 is lined up with the arrow pointer
(the arrows indicates 4:00 p.m. approxima-
tely).
Note
: Never turn the dial in a counter-
clockwise direction!
The timer is in effect, an electric clock and
works only if the plug is connected to the
power supply. Whenever the plug is discon-
nected or there is a power failure, the pro-
grammer stops (the clock is then “slow”) and
must be re-set.
The unit can be used in either
programmed
or
non-programmed
mode.
PROGRAMMED MODE
1) Release B timer button.
2) Set the operating times by pushing out the
notches on the dial corresponding to the
period required (each notch represents 15
min).
3) Check that the timer indicates the correct
time (see instructions on setting).
4) Select the desired function as shown in the
chart.
The unit will now switch on and off each
day at the selected times.
Note: To override the programmed operating
times, simply press the ON/OFF key.
NON-PROGRAMMED MODE
1) B TIMER button must be pressed
2) Select the desired function as shown in the
chart on the following page.
arrow pointer
Note:
For technical reasons, the temperature is not expressed in degrees but by a line increa-
sing in thickness. We therefore recommend that when starting up the appliance, the
thermostat be turned to maximum (thick line = maximum cold). When the desired tem-
perature has been reached, turn the thermostat slowly away from the maximum cooling
position until the appliance switches off. Leave the thermostat in this position. The air con-
ditioner is now programmed to maintain the exact temperature at all times.
After switching the appliance off, wait at least 3 min. before switching on again.
eg. from 9 to 11 a.m.
Operating time
pac360U OK GB 24-04-2003 16:32 Pagina 11
