DeLonghi Nespresso LATTISSIMA PRO EN 750.MB, User Manual

Page: 18 / 22

EN
FR
TROUBLESHOOTING
No light on display.
£ Check the mains, plug, voltage, and fuse. Press the ON button located behind the machine
display. In case of problems, call the
Nespresso
Club.
Machine too hot message, indicated in display.
£ In certain conditions, machine heater reaches high temperature, (ie. after an emptying of
the fluid system). Simply wait, machine will cool down automatically.
Coffee comes out very slowly.
£ Flow speed depends on the coffee variety.
£ Descale if necessary; see Descaling section.
Coffee is not ho t enough.
£ Preheat cup.
£ Descale if necessary; see Descaling section.
Capsule area is leaking (water in capsule container).
£ Position capsule correctly. If leakages occur, call the
Nespresso
Club.
Irregular blinking.
£ Send appliance to repair or call the
Nespresso
Club.
No coffee, just water runs out (despite inserted capsule).
£
In case of problems, call the
Nespresso
Club.
Lever cannot be closed completely.
£ Empty capsule container. Make sure that no capsule is blocked inside the capsule
container.
Quality of milk froth is not up to standard.
£ For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature
(about 4° C).
£ Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the
milk regulator knob until «CLEAN» position.
£ Every two days, disassemble the R. C. S. and clean all components in the upper level of a
dishwasher.
Machine needs repair message, indicated in display.
£ Contact the
Nespresso
Club or
Nespresso
authorized representative for examination,
repair or adjustment.
18
6926_UM_LATTISSIMA_PREMIUM_Z2A.indb 18 17.10.13 19:57