26
Light
Meaning
Preparation with pre-
ground coffee has been
selected without placing
any pre-ground coffee in the
funnel. Make sure the funnel
is not blocked, then add one
level measure of pre-ground
coffee and repeat delivery.
The water circuit is empty.
Deliver hot water by turning
the dial to the
posi-
tion or pressing the “Steam”
button
The grounds container
needs emptying
→
Light
Meaning
The grounds container is
missing, or not inserted
correctly: insert the drip
tray complete with grounds
container and press as far as
it will go
Descaling is required (“12.
Descaling” and the dedi-
cated section of the Quick
Guide)
Descaling has been inter-
rupted. To use the machine
again:
1. Press the button;
2. If the steam dial is in
the
O
position, turn it
to the
position;
delivery will begin and
descaling will resume
from Fig. 14, page 10.
14. TROUBLESHOOTING
Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact customer services.
PROBLEM
POSSIBLE CAUSE
REMEDY
The appliance does not come on.
It is not plugged into the mains socket.
Plug into the mains socket.
The coffee is not hot.
The cups were not preheated.
Warm the cups by rinsing them with hot
water (Please note: you can use the hot
water function).
The internal circuits of the appliance have
cooled down because 2-3 minutes have
elapsed since the last coffee was made.
Before making coffee, press and hold the
button for a few seconds to perform a
rinse cycle and warm the internal circuits.
Coffee temperature setting too low.
Set a hotter coffee temperature in the set-
tings menu (see “9. Settings menu”).
The machine must be descaled
Carry out the descale procedure. Next,
check the water hardness (“6. Measuring
water hardness”) and make certain the
machine setting matches the local water
supply hardness (“9. Settings menu”).
→
