4
5
its service agent or similarly qualified
persons in order to avoid a hazard.
- If the kettle is overfilled, boiling water
may overflow.
- The heating element surface is subject to
residual heat after use.
Please note:
This symbol indicates recommendations and important
information for the user.
- Remove
the kettle from its power base before filling.
-
Never move the kettle while it is in use.
- Do not use the kettle for any purpose other than heating
water.
- De’Longhi will not accept any liability if the appliance is
subject to improper use, or failure to comply with these
instructions.
- Never use the kettle without its lid and filter.
- Position the kettle properly on the power base before
switching on.
-
Use the kettle only with the power base
supplied (and vice versa).
The appliance complies with the following EC directives:
- This appliance conforms to the Directive 2004/108/EC
relative to electromagnetic compatibility.
- Materials and accessories coming into contact with food
conform to EC regulation 1935/2004.
DESCRIPTION
A
Removable filter
B
Removable lid
C
Kettle body
D
Power-on indicator lights
E
360° base with cord storage
F
Plug
G
ON/OFF switch
H
Water level indicator
USE
Before use
- Remove all packaging from the kettle and power base.
- Remove any labels from the outer stainless steel surfaces.
- Remove the filter (fig. 1) and wash with water (fig. 2).
Refer to “Removing the scale filter”
- Fill the kettle and boil.
- The boiled water should be discarded and the kettle rinsed
out with cold water. This procedure should be carried out
three times, to remove any manufacturing dust, etc.
- After the kettle has been rinsed out, re-fit the filter (fig. 3).
In use
With the specially designed power base and central connector,
you can now set the kettle on the base at any angle, from any
position.
- Release cord from storage base
and adjust length by winding
around the base to give the
correct cord length to reach the
plug socket to be used (fig. 4).
- Do not leave loose cord hanging
over the edge of work surfaces.
Filling
- Remove the kettle from the base unit before filling.
- Open lid and fill kettle to desired level.
Do not fill with less than 0,3 litre of water
to prevent
the kettle running dry while operating; misuse of this kind
will shorten the life of the element.
Do not fill with more than 1.7 litres of water
(up to
the MAX level).
If the kettle is overfilled, there is a risk that boiling
water may be ejected causing burns.
Switching on
- Plug the power base into the mains socket.
- Place kettle on power base.
- Press the ON/OFF switch down (fig. 5) to switch the kettle
on.
- The pilot light will switch on.
- The kettle will automatically
switch off once the water is
boiled (the ON/OFF switch will
click upwards and the lights
will switch off ).
3
4
5
1
2