DeLonghi ICMI211, Manual

Page: 4 / 83

3
IT EN FR DE
pag. 6 page 9 page 12 S. 15
NL ES PT EL
pag. 18 pág. 21 pág. 24 σελ. 27
RU HU CS SK
стр. 30 old. 34 str. 37 str. 40
PL NO SV DA
str. 43 sid. 46 sid. 49 sid. 52
FI HR SL BG
siv. 55 str. 58 sid. 61 стр. 64
RO TR KZ FA
pag. 67 say. 70 73 Бет. 5
AR
2
ELECTRICAL CONNECTION (UK ONLY)
A) If your appliance comes itted with a plug, it will incorpo-
rate a 13 Amp fuse. If it does not it your socket, the plug
should be cut of from the mains lead, and an appropriate
plug itted, as below.
WARNING: Very carefully dispose of the cut of plug after
removing the fuse: do not insert in a 13 Amp socket el-
sewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the cir-
cuit must be protected by a 15 Amp fuse. If the plug is a
moulded-on type, the fuse cover must be re-itted when
changing the fuse using a 13 Amp Asta approved fuse to
BS 1362. In the event of losing the fuse cover, the plug
must NOT be used until a replacement fuse cover can be
obtained from your nearest electrical dealer. The colour of
the correct replacement fuse cover is that as marked on the
base of the plug.
B) If your appliance is not itted with a plug, please follow the
instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol
or
coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked with
the letter L or coloured red.