Chlorine filter (if fitted)
The filter eliminates the taste of chlorine from the water. To install
the filter, proceed as follows :
• Remove the chlorine filter from the plastic bag and rinse it in
tap water.
• Lift the water tank lid and remove the chlorine filter holder
from its housing by lifting it upwards (fig. 1).
• Open the chlorine filter holder by pressing the parts marked
“PUSH” and carefully place the filter in the holder as shown in
fig. 2.
• Close the filter holder and replace it in its housing pushing it
fully down.
• The chlorine filter must be replaced every 80 uses, and alzays
after six months of operation.
How to prepare the filter coffee
• Lift the water tank lid and remove the tank (fig. 3)
• Fill the tank with fresh, clean water up to the level correspon-
ding to the number of cups of coffee required. Place the tank
back in the coffee maker pressing it lightly into place.The tank
may also be filled without being removed, using the coffee jug
marked with the level indicators (fig. 4).
• Open the filter holder door by pullling it to the right (fig. 5).
• Place the permanent filter in the filter holder (fig. 6).
• Place the ground coffee in the filter, using the measuring spoon
supplied, and level evenly (Fig. 7). As a general rule, use a level
measuring spoon of ground coffee (around 7 grams) for each
cup (for example, 8 spoons to make 8 cups). If you prepare 11-
12 cups, reduce the quantity of coffee and never use more than
11 level spoons.The quantity of ground coffee used will vary
according to personal taste. Use good quality, medium ground
coffee, packaged for filter coffee makers.
• Close the filter holder and place the jug with the lid in place on
the warming plate.
• Choose the desired flavour as indicated in the paragraph “How
to choose the flavour”.
fig. 6
Filter Coffee Maker
4
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 7
ICM 50 UK 12-02-2003 12:24 Pagina 4
