6
TM
pliance. The two tabs are identified by the word "PUSH" (fig-
ure 2/3). If you want to install it to the wall, however, proceed
as described for models with towel rail.
OPERATION AND USE
1. Make sure the appliance is turned off before insert-
ing the plug into the power socket and turning on the
socket switch if necessary.
2. Turn on the appliance by placing the thermostat (C) in
the maximum position and the function selector (A) in
one of the following positions: /
1/2
.
-
Summer
(fan only): turn the function selector (A) knob
clockwise to position.
-
Min power operation
: Turn the function selector (A)
to position "
1
". The red warning lamp lights up.
-
Max power operation
: Turn the function selector (A)
to position "
2
".
-
To switch off the appliance
: Turn the function selec-
tor to position "
l
".
Adjusting the thermostat
When the room has reached the desired temperature, slowly
move the thermostat counterclockwise until the indicator
light turns off and no further.
The temperature thus fixed will be automatically maintained
by the thermostat.
Freezing prevention
With the thermostat knob at the minimum position and
the function selector at pos. 2 the appliance keeps the am-
bient temperature at about 5°C, preventing freezing with a
minimum expenditure of energy.
MODELS WITH 24-HOUR TIMER (if provided)
To program the heating proceed in the following way:
Look at the time on your watch. If it is 10.00 for example, turn
the numbered programmer disk until the number 10 coin-
cides with the index mark
s
imprinted on the programmer.
Set the periods of time that you want the appliance to func-
tion, pushing the teeth toward the centre. Each tooth corre-
sponds to a period of time of 15 min. At this point you will see
the red sectors that correspond to the periods of operation.
Set up in this way, the unit will work automatically every day
during the scheduled periods. (Important: the plug must be
always inserted in the power socket and the socket switched
on if necessary).
- To change the programming, simply return the red teeth
to the initial position and set the new operating periods.
- If you want to operate the appliance without program-
ming, push all the teeth toward the centre. In this case,
for total shutdown of the appliance, as well as turning
off the switches, it is also necessary to remove the plug
from the power socket, to avoid unnecessary operation
of the programmer.
MAINTENANCE
- Before cleaning, always remove the plug from the pow-
er socket.
- Regularly clean the air intake and outlet grilles.
- Never use abrasive powders or solvents.
TECHNICAL CHARACTERISTICS
Power supply
See appliance rating plate
Power consumption
“
