23
proBlEm
possiBlE causE
solution
The coffee is delivered too
quickly.
•
The coffee is ground too coarsely.
•
Turn the grinding adjustment dial one click
anticlockwise towards “1” while the coffee mill is
in operation (fig. 10). Avoid turning the grinding
adjustment dial excessively otherwise when you
select two cups, the coffee may be delivered a drop
at a time.
Coffee does not come out of
one of the spouts.
•
The spouts are blocked.
•
Clean the spouts with a toothpick (fig. 38).
Water comes out of the spouts
instead of coffee.
•
The pre-ground coffee may be blocked in the funnel
(A4).
•
Empty the funnel with the help of the spatula on
the cleaning brush provided , as described in the
section “Cleaning the pre-ground coffee funnel”.
The milk contains bubbles or
squirts out of the milk spout.
•
The milk is not cold enough or is not skim or 2%
milk.
•
You should ideally use skim or 2% milk at refrigerator
temperature (about 41°F / 5°C). If the result is not as
you wished, try changing brand of milk.
•
The froth regulator is incorrectly adjusted.
•
Adjust following the instructions in the section on
preparing drinks with milk.
•
The milk container lid is dirty.
•
Clean the milk container lid as described in the
section “Cleaning the milk container”.
The milk is not frothed.
•
The froth regulator is incorrectly adjusted.
•
Adjust following the instructions in the section on
preparing drinks with milk.
•
The milk container lid is dirty.
•
Clean the milk container lid as described in the
section “Cleaning the milk container”.
The appliance does not come
on.
•
It is not plugged into the mains socket.
•
Plug into the mains socket.
•
The main switch is not turned on.
•
Place the main switch in the I position (fig. 1).
The milk does not come out of
the milk spout.
•
The milk container lid is dirty.
•
Clean the milk container lid as described in the
section “Cleaning the milk container”.
“Energy Saving” mode is
enabled, but the cup warmer
is hot.
•
A number of drinks have been prepared in rapid
succession.
