21
DisplayED mEssaGEs
DisplayED mEssaGE
possiBlE causE
solution
FILL TANK!
•
Insufficient water in the tank.
•
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go until it clicks into place.
GROUND TOO FINE ADJUST
MILL!
Insert water spout and press
OK
•
The grinding is too fine and the coffee is delivered
too slowly or not at all.
•
Repeat coffee delivery and turn the grinding
adjustment dial one click clockwise towards “7”
while the coffee mill is in operation. If after making
at least 2 coffees delivery is still too slow, repeat
the correction procedure, turning the grinding
adjustment dial another click until delivery is correct.
If the problem persists, press the icon corresponding
to OK and deliver water from the spout until it flows
out normally.
INSERT WATER SPOUT!
•
The water spout is not inserted or is inserted
incorrectly.
•
Insert water spout as far as it will go.
EMPTY GROUNDS
CONTAINER!
•
The grounds container is too full or more than 3
days have passed since you last made coffee (this
guarantees correct hygiene of the machine).
•
Empty the grounds container and clean, then
replace. Important: when removing the drip tray,
the grounds container must be emptied, even if it
contains few grounds. If this is not done, when you
make the next coffees, the grounds container may fill
up more than expected and clog the machine.
INSERT GROUNDS CONTAINER
•
After cleaning, the grounds container has not been
replaced.
•
Open the service door, remove the drip tray and
insert the grounds container.
ADD PRE-GROUND COFFEE
•
The “ground coffee” function has been selected
without placing any pre-ground coffee in the funnel.
•
Place pre-ground coffee in the funnel or deselect the
“ground coffee” function.
•
The funnel is clogged.
•
Empty the funnel with the help of the spatula on the
cleaning brush provided , as described in the section
“Cleaning the pre-ground coffee funnel”.
DESCALE!
•
The machine must be descaled.
•
The descaling procedure described in the “Descaling”
section needs to be performed as soon as possible.
LESS COFFEE!
•
Too much coffee has been used.
•
Select a milder taste or reduce the quantity of pre-
ground coffee and then request the coffee again.
FILL BEANS CONTAINER!
•
The coffee beans have run out.
•
Fill the beans container
•
The pre-ground coffee funnel is clogged.
•
Empty the funnel with the help of a brush as
described in the section “Cleaning the pre-ground
coffee funnel”.
INSERT INFUSER ASSEMBLY!
•
The infuser has not been replaced after cleaning.
•
Insert the infuser as described in the paragraph
“Cleaning the infuser”.
